02-10-2019 11:55 PM - edited 07-05-2021 09:49 AM
Hi All,
Here i have an 48 Port C2960-X PoE.I connect the PBX's, and 3 Aruba AP's.
But the the problem is Aruba AP couldn't get the exact power,It works under power save mode.
I have a question , Why this PoE can't supply the exact power for the Access points ?
Appreciate the fast replays.
02-11-2019 01:15 AM
- Connect the AP , and after a while (5 mins) , issue show logging on the switch , you will then probably get additional info, as to why (exact) power cannot be provided.
M.
02-11-2019 01:27 AM
What are the requirements of the Aruba APs. What Model are they?
Try enabling LLDP if not already enabled: lldp run
Can you share a show power inline from the switch and show run interface <interface AP connected>
Do you see any error on the APs?
02-11-2019 02:38 AM
02-11-2019 05:09 AM
02-11-2019 01:29 AM
02-11-2019 02:40 AM
02-11-2019 05:06 AM
02-11-2019 05:09 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide