ā09-15-2021 01:29 AM
Hi you all
When doing a radioactive trace on a C9800-CL, it starts the the trace but, when we chose to generate the log it says ->Not enough free memory to run this command, aborting. Unfortunately I do not know the hardware layout on the hyper visor yet. But lookning at the memory on the C9800 it's only using 25%. How to start Troubleshoot this issue
Software 17.6.1
AP 9120AXI
Solved! Go to Solution.
ā09-17-2021 02:00 AM
Files are written in memory first then on disk bootflash:/tracelogs, when it reaches the maximum size it follows FIFO. So as per the theory if your bootflash is having free space this should work. I would also keep an eye on memory utilization and if all seems ok, I would reach out to TAC.
ā11-11-2021 03:32 AM
Hi Fesk6895
Yes I found a solution.
Converted 9800-CL about from bundle to install mode.
And as far as I know, Install mode Cisco is recommended.
ā09-15-2021 03:10 AM
Is the VM running with correct and dedicated resources? Can you check the bootflash free space and clear all unwarted files. (dir)
ā09-15-2021 03:41 AM
ā09-17-2021 12:44 AM
Unfortunately, the above did not work. VM is create via OVA, resources are allocated via OVA config.4 cores, 8 GB ram, 16GB storage. there is 3GB available out of 6.2GB one the boot flash
ā09-17-2021 02:00 AM
Files are written in memory first then on disk bootflash:/tracelogs, when it reaches the maximum size it follows FIFO. So as per the theory if your bootflash is having free space this should work. I would also keep an eye on memory utilization and if all seems ok, I would reach out to TAC.
ā09-17-2021 04:25 AM
Hi Arshadsaf
Thank you for your time, I think ill reach out for TAC.
Have grate weekend.
ā11-11-2021 02:54 AM
Hi Karsten_Andersen
Did you find a solution to the problem?
ā11-11-2021 03:32 AM
Hi Fesk6895
Yes I found a solution.
Converted 9800-CL about from bundle to install mode.
And as far as I know, Install mode Cisco is recommended.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide