Can a Cisco Business 150AX Be Configured as a Mesh Extender

[aleksandarkirilov]

Hello, I have bought two 150AX access points and I fear that the second one cannot be configured as a Mesh Extender.

I found a document describing how this is done on the older 140AC models: https://www.cisco.com/c/en/us/support/docs/smb/wireless/CB-Wireless-Mesh/kmgmt-3144-cbw-mesh-role-selection.html

Is this possible on 150 AX or do I need to buy another AP ?

Thank you kindly for your help

[balaji.bandi]

possible check below guide :

https://www.cisco.com/c/en/us/support/docs/smb/wireless/CBW-AX/kmgmt-3416-150AX-day-zero-config.html

[aleksandarkirilov · Accepted solution]

Hello and thank you for the prompt answer. It turned out that the 150 AX can also be configured in Role "Mesh Extender" by following the same guide I linked in my question. The issue I had was that I forgot to check the "advanced configuration".

[balaji.bandi]

glad suggestion helped and you able to proceed with config.