10-12-2007 10:10 AM - edited 07-03-2021 02:45 PM
We have a 1510 mesh network and need to add a 1522 MAP. Is this possible?
10-12-2007 10:54 AM
Hi Joseph,
This is not a supported configuration;
Q. Can I have a network with both Cisco Aironet 1520 and Cisco Aironet 1510 mesh access points?
A. It is possible to have a network with both the Cisco Aironet 1520 and 1510 Series mesh access points. The Cisco Aironet 1520 Series needs to be deployed as a rooftop access point and the 1510 can be deployed as a mesh access point. Both the 1510 and 1520 Series can operate in the same plant; however, the WLAN controller will require a software upgrade to allow seamless operation. The 1520 Series access point is suited to mounting on poles, buildings and lights. It is powered through local power using the Cisco Power Injector or unswitched street light power sources. The 1520 Series is more adaptable: in addition to being mounted like the 1510 Series, the 1520 Series can be strand-mounted, and powered and connected to the cable plant for backhaul of data to the head end.
http://www.cisco.com/en/US/netsol/ns756/netqa0900aecd8066a17b.html
Have a look at Table 3 in this doc :(
Cisco Aironet 1510 RAP with the following combination;
Cisco Aironet 1505 MAP = No
Cisco Aironet 1510 MAP = Yes
Cisco Aironet 1522 MAP = No
From this doc;
http://www.cisco.com/en/US/products/ps8368/prod_bulletin0900aecd8063360c.html
Hope this helps!
Rob
10-16-2007 07:08 AM
Full support between 1510 and 1520 series APs is due to arrive this quarter. I will ask the Lily Chen of the BU about ETA for you.
Dennis
10-19-2007 06:47 AM
Hi Dennis,
Do you have an ETA for 1520<->1510 interop with RAP/MAP?
10-19-2007 08:21 AM
The roadmap say 4th qtr clndr year 2007. I will let you know as soon as I see it posted.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide