cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1636
Views
5
Helpful
2
Replies

Can AP Cisco Aironet 1815I detect bluetooth ?

hi all

i have a question 

AP Cisco 1815I can detect buetooth ?

because I need to use it detect bluetooth on CMX . So i'm not sure about if need detect bluetooth AP need support cleanair, but on ap 1815i can not support clenair but integreat bluetooth low energy.

 

thank you

1 Accepted Solution

Accepted Solutions

Rasika Nayanajith
VIP Mentor VIP Mentor
VIP Mentor

AP Cisco 1815I can detect buetooth ?

Note that 1815 does not support clean air. There is a feature called "Spectrum Intelligence" available with limited features. Bluetooth will be detect as FHSS device & cannot be differentiate if it is Bluetooth or Dect phone, etc

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-6/b_wlc_8_6_spectrum_intelligence_on_cisco_wave_2_aps.html

  • Only 3 Interference types are detected

    - Microwave Oven (2.4 GHz only)

    - Continuous Wave (2.4 and 5 GHz)

     -SI-FHSS (2.4 and 5 GHz)

  • SI cannot differentiate between multiple devices of the same type - BlueTooth, Dect Phone, and FHSS are all SI-FHSS and only one alert will be displayed regardless if there is 1 device or 10

 

BLE is for different purpose (location tracking), not to detect bluetooth.

 

HTH

Rasika

*** Pls rate all useful responses ***

View solution in original post

2 Replies 2

Rasika Nayanajith
VIP Mentor VIP Mentor
VIP Mentor

AP Cisco 1815I can detect buetooth ?

Note that 1815 does not support clean air. There is a feature called "Spectrum Intelligence" available with limited features. Bluetooth will be detect as FHSS device & cannot be differentiate if it is Bluetooth or Dect phone, etc

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-6/b_wlc_8_6_spectrum_intelligence_on_cisco_wave_2_aps.html

  • Only 3 Interference types are detected

    - Microwave Oven (2.4 GHz only)

    - Continuous Wave (2.4 and 5 GHz)

     -SI-FHSS (2.4 and 5 GHz)

  • SI cannot differentiate between multiple devices of the same type - BlueTooth, Dect Phone, and FHSS are all SI-FHSS and only one alert will be displayed regardless if there is 1 device or 10

 

BLE is for different purpose (location tracking), not to detect bluetooth.

 

HTH

Rasika

*** Pls rate all useful responses ***

thank you rasika
you mean 1815I can not support BLE tag with CMX right.
i try to use app BLE braodcast on mobile sometime i see bluetooth icon on CMX but sometime it not show.
how to do it work ?
i need track location client by use bluetooth from smartwatch from client as garmin applewatch ETC.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers