cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2024
Views
5
Helpful
2
Replies

Can AP Cisco Aironet 1815I detect bluetooth ?

hi all

i have a question 

AP Cisco 1815I can detect buetooth ?

because I need to use it detect bluetooth on CMX . So i'm not sure about if need detect bluetooth AP need support cleanair, but on ap 1815i can not support clenair but integreat bluetooth low energy.

 

thank you

1 Accepted Solution

Accepted Solutions

AP Cisco 1815I can detect buetooth ?

Note that 1815 does not support clean air. There is a feature called "Spectrum Intelligence" available with limited features. Bluetooth will be detect as FHSS device & cannot be differentiate if it is Bluetooth or Dect phone, etc

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-6/b_wlc_8_6_spectrum_intelligence_on_cisco_wave_2_aps.html

  • Only 3 Interference types are detected

    - Microwave Oven (2.4 GHz only)

    - Continuous Wave (2.4 and 5 GHz)

     -SI-FHSS (2.4 and 5 GHz)

  • SI cannot differentiate between multiple devices of the same type - BlueTooth, Dect Phone, and FHSS are all SI-FHSS and only one alert will be displayed regardless if there is 1 device or 10

 

BLE is for different purpose (location tracking), not to detect bluetooth.

 

HTH

Rasika

*** Pls rate all useful responses ***

View solution in original post

2 Replies 2

AP Cisco 1815I can detect buetooth ?

Note that 1815 does not support clean air. There is a feature called "Spectrum Intelligence" available with limited features. Bluetooth will be detect as FHSS device & cannot be differentiate if it is Bluetooth or Dect phone, etc

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-6/b_wlc_8_6_spectrum_intelligence_on_cisco_wave_2_aps.html

  • Only 3 Interference types are detected

    - Microwave Oven (2.4 GHz only)

    - Continuous Wave (2.4 and 5 GHz)

     -SI-FHSS (2.4 and 5 GHz)

  • SI cannot differentiate between multiple devices of the same type - BlueTooth, Dect Phone, and FHSS are all SI-FHSS and only one alert will be displayed regardless if there is 1 device or 10

 

BLE is for different purpose (location tracking), not to detect bluetooth.

 

HTH

Rasika

*** Pls rate all useful responses ***

thank you rasika
you mean 1815I can not support BLE tag with CMX right.
i try to use app BLE braodcast on mobile sometime i see bluetooth icon on CMX but sometime it not show.
how to do it work ?
i need track location client by use bluetooth from smartwatch from client as garmin applewatch ETC.
Review Cisco Networking for a $25 gift card