10-21-2015 01:20 PM - edited 07-05-2021 04:07 AM
I have installed a CISCO PI 3.0 on our facilities to maintain the configurations of our CISCO devices and to control two wireless controllers.
The discovery process worked correctly and I was able to add both controllers to the CISCO PI.
When I tried to add my CISCO MSE to the PI I hit a wall. I tried to look around for a solution but none work. When I try to add the MSE, I fill the inputs and then an error shows saying:
"No response from Server. It may be unreachable, or server is down or HTTPS connection to server failed."
I can't make anything from this since from the PI I can ping them and the MSE is up and working.
Does anybody knows what the problem is?
Solved! Go to Solution.
10-21-2015 07:37 PM
There is no integration between PI & CMX 10.x. So you do not want to do this.
Only thing you want to do is give PI credential when setting up CMX while synchronize maps & controller information onto CMX.
HTH
Rasika
*** Pls rate all useful responses ***
10-21-2015 07:37 PM
There is no integration between PI & CMX 10.x. So you do not want to do this.
Only thing you want to do is give PI credential when setting up CMX while synchronize maps & controller information onto CMX.
HTH
Rasika
*** Pls rate all useful responses ***
10-22-2015 10:15 AM
Ok, great!
I didn't knew that.
Thank you.
11-09-2017 12:51 PM
any suggestions on doing this procedure?
11-10-2017 02:20 AM
Please open a new thread with more details about your used products and what you try to achieve.
12-02-2017 10:34 AM
Sir I have also recieved same error. Could you please explain the resolution in more details.
Thank you
08-10-2018 03:16 AM
Now you can do it with PI3.2 abover and CMX10.3 abover.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide