CCX compatible WIFI RTLS Tag

rajat.ratra · ‎02-14-2019

Hi,

I am working on designing a CCX compatible WIFI RTLS tag for asset management application requirements. I am planning to use TI CC3200 chipset for the same. As informed to me by TI, for CCX, Cisco will be only able to help, so approaching you through this post. Please help get started.

Await guidance.

Thanks !!

Flavio Miranda · ‎02-15-2019

Hi

I dont believe this is the right place. Most of the active professionals here are cisco net admins but do not work for Cisco and will probably not going to help you in a so specific subject.

Might exist a different channel for that matter.

Good look.

-If I helped you somehow, please, rate it as useful.-

Rich R · ‎02-15-2019

Agreed with Flavio.
Suggest you contact your Cisco account team for assistance. They can advise on engaging Cisco consultancy for your project.

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390

Dennis Bland · ‎05-15-2019

dB Performance is a Cisco licensed provider of CCX middleware. PM me if you are interested.

CCX compatible WIFI RTLS Tag

RTLS in Cisco Wi-Fi

Visão geral do modelo de configuração Catalyst 9800 - Tags e Profiles

Wifi Opção VLAN ID

WiFi 7 Compatibility

route-tag をつけたルート情報の広告