Change Transmit signal Level on 2702 AP

[gl_al]

Hi All!

Tell me please, can i adjust the signal level on the  AIR AP 2702? I use Lightweight firmware. Becouse when notebook connect to AP my connection speed no more than 72Mbit, mobile device connection speed 65 Mbit.

[Leo Laohoo]

---

@gl_al wrote:

Becouse when notebook connect to AP my connection speed no more than 72Mbit, mobile device connection speed 65 Mbit. 

---

This value is dependent on a lot of things: 

1.  What Data Rates are enabled; 

2.  Distance from the AP;

3.  What radio is the client connected to, 2.4 Ghz or 5.0 Ghz;

4.  What chipset is the wireless client capable of;

5.  Co-channel interference.

[gl_al]

my distance to AP 5-7m , my mobile device support Wi-Fi 802.11n, notebook have intel AC dual band 3168. All ap configure with wlc 5760

[Leo Laohoo]

---

@gl_al wrote:
my distance to AP 5-7m , my mobile device support Wi-Fi 802.11n, notebook have intel AC dual band 3168. All ap configure with wlc 5760

---

When performing the speed test, what radio were the clients connected on, 2.4 Ghz or 5.0 Ghz?  (NOTE:  Don't give an answer of "802.11n".)

---

@gl_al wrote:
notebook have intel AC dual band 3168

---

Intel 3168 is only 1x1.  The best you can do with this is about 125 Mbps.  Tops.

What firmware is the wireless NIC running on?

[gl_al]

I check again and my colleague with Sony xperia connect 107 Mbit. I will continue to test maybe my device that working.