05-28-2018 02:17 AM - edited 07-05-2021 08:40 AM
Hi All!
Tell me please, can i adjust the signal level on the AIR AP 2702? I use Lightweight firmware. Becouse when notebook connect to AP my connection speed no more than 72Mbit, mobile device connection speed 65 Mbit.
05-28-2018 02:30 AM - edited 05-28-2018 02:31 AM
@gl_al wrote:
Becouse when notebook connect to AP my connection speed no more than 72Mbit, mobile device connection speed 65 Mbit.
This value is dependent on a lot of things:
1. What Data Rates are enabled;
2. Distance from the AP;
3. What radio is the client connected to, 2.4 Ghz or 5.0 Ghz;
4. What chipset is the wireless client capable of;
5. Co-channel interference.
05-28-2018 02:44 AM
05-28-2018 03:11 AM - edited 05-28-2018 03:14 AM
@gl_al wrote:
my distance to AP 5-7m , my mobile device support Wi-Fi 802.11n, notebook have intel AC dual band 3168. All ap configure with wlc 5760
When performing the speed test, what radio were the clients connected on, 2.4 Ghz or 5.0 Ghz? (NOTE: Don't give an answer of "802.11n".)
@gl_al wrote:
notebook have intel AC dual band 3168
Intel 3168 is only 1x1. The best you can do with this is about 125 Mbps. Tops.
What firmware is the wireless NIC running on?
05-28-2018 04:46 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide