03-04-2021 02:48 PM - edited 07-05-2021 01:19 PM
Hi all,
Is it required for an Cisco outdoor 1562i or e model to have a NEMA enclosure installed as well?
The data sheet mentions humidity are levels 0 - 95% , non-condensing. So I'm guessing that they're required?
Cisco Aironet 1560 Series Outdoor Access Points Data Sheet - Cisco
Thanks.
Solved! Go to Solution.
03-05-2021 03:05 PM - edited 03-05-2021 03:05 PM
Make sure the grounding lugs are installed and the APs are earthed properly.
We have about 200 of them out in the rain and >40C heat (Australia) without any issues.
03-04-2021 09:15 PM
Depends on the environment where the APs are going to be installed but I have never used an enclosure for the 1562.
03-05-2021 07:20 AM
Thanks for the response. We're looking at installing some of that model but they may get exposed to rain. I'm looking at the AP data sheet, but I couldn't find any information about being exposed to storms.
03-05-2021 03:05 PM - edited 03-05-2021 03:05 PM
Make sure the grounding lugs are installed and the APs are earthed properly.
We have about 200 of them out in the rain and >40C heat (Australia) without any issues.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide