04-16-2014 03:50 AM - edited 07-05-2021 12:41 AM
Dear Team,
I am trying to join the access point 1602 with Cisco 4408 controller. Cisco controller 4408 software version is 7.0.240.0. Is it possible to join the access point 1602 with Cisco 4408 contoller.
Regards,
Jubair.S
Solved! Go to Solution.
04-16-2014 10:53 AM
Hello Jubiar,
this release of the WLC software version dont support 1602 AP, the first release which supports this AP is 7.4.100.0.
You can refer the compatibility matrix (very usefull document):
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
Marek
04-16-2014 01:47 PM
As Marek pointed out in that compatibility matrix, you cannot use 44xx for any newer AP models. Current controller you have cannot run any software version above 7.0.x. So you have to purchase newer controller like 2504/5508 in your case. vWLC is another option if you are running AP in FlexConnect/HREAP mode.
HTH
Rasika
**** Pls rate all useful responses ***
04-16-2014 10:53 AM
Hello Jubiar,
this release of the WLC software version dont support 1602 AP, the first release which supports this AP is 7.4.100.0.
You can refer the compatibility matrix (very usefull document):
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
Marek
04-16-2014 01:47 PM
As Marek pointed out in that compatibility matrix, you cannot use 44xx for any newer AP models. Current controller you have cannot run any software version above 7.0.x. So you have to purchase newer controller like 2504/5508 in your case. vWLC is another option if you are running AP in FlexConnect/HREAP mode.
HTH
Rasika
**** Pls rate all useful responses ***
04-16-2014 05:37 PM
Duplicate posts.
Go here: https://supportforums.cisco.com/discussion/12176186/cisco-1602-access-point-supported-wlc-models
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide