Cisco 1602 access point supported WLC

[jubair151]

Dear Team,

I am trying to join the access point 1602 with Cisco 4408 controller. Cisco controller 4408 software version is 7.0.240.0.  Is it possible to join the access point 1602 with Cisco 4408 contoller.

Regards,

Jubair.S

[marek.golha · Accepted solution]

Hello Jubiar,

this release of the WLC software version dont support 1602 AP, the first release which supports this AP is 7.4.100.0.

You can refer the compatibility matrix (very usefull document):

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

Marek 

[Rasika Nayanajith · Accepted solution]

As Marek pointed out in that compatibility matrix, you cannot use 44xx for any newer AP models. Current controller you have cannot run any software version above 7.0.x. So you have to purchase newer controller like 2504/5508 in your case. vWLC is another option if you are running AP in FlexConnect/HREAP mode.

HTH

Rasika

**** Pls rate all useful responses ***

[Leo Laohoo]

Duplicate posts.  

Go here:  https://supportforums.cisco.com/discussion/12176186/cisco-1602-access-point-supported-wlc-models