07-08-2020 05:17 AM - edited 07-05-2021 12:15 PM
Hi everyone,
I meet an issue about Cisco 2504 web authentication with firmware: 8.5.140. Here is the configuration:
DNS Server IP............................... 8.8.8.8
Web Mode.................................... Enable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode SSL Protocol................ Disable
Web CSRF check.............................. Enable
IPv4 AP Multicast/Broadcast Mode............ Multicast Address : 239.0.0.0
IPv6 AP Multicast/Broadcast Mode............ Multicast Address : ::
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
IGMP Query Interval......................... 20 seconds
MLD snooping................................ Disabled
MLD timeout................................. 60 seconds
Mgmt Via Wireless Interface................. Enable
Mgmt Via Dynamic Interface.................. Disable
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
Mesh Backhaul RRM........................... Disable
AP Fallback ................................ Enable
AP EasyAdmin ............................... Disable
AP Virtual IP .............................. 0.0.0.0
Web Auth CMCC Support ...................... Disabled
Web Auth Redirect Ports .................... 80
Web Auth Proxy Redirect ................... Disable
Web Auth Captive-Bypass .................. Disable
Web Auth Secure Web ....................... Enable
Web Auth Secure Web Cipher Option ......... Disable
Web Auth Secure Web Sslv3 ................. Disable
Web Auth Secure Redirection ............... Disable
IP/MAC Addr Binding Check .................. Enabled
Link Local Bridging Status ................. Disabled
CCX-lite status ............................ Disable
oeap-600 dual-rlan-ports ................... Disable
oeap local-network ......................... Enable
oeap-600 Split Tunneling (Printers)......... Disable
WebPortal Online Client .................... 0
WebPortal NTF_LOGOUT Client ................ 0
mDNS snooping............................... Disabled
mDNS Query Interval......................... 15 minutes
Web Color Theme............................. Default
Capwap Prefer Mode.......................... IPv4
Network Profile............................. Disabled
Client ip conflict detection (DHCP) ........ Disabled
Mesh BH RRM ................................ Disable
Mesh Aggressive DCA......................... Disable
Mesh Auto RF................................ Disable
HTTP Profiling Port......................... 80
HTTP-Proxy Ip Address....................... 0.0.0.0
HTTP-Proxy Port............................. 80
WGB Client Forced L2 Roam................... Disabled
The IP Virtual is: 192.0.2.1, DNS Hostname is blank.
Layer2 Security: None
Layer 3 Security: Web Policy, Passthrough
The problem is web authentication work perfectly on Apple device, but not succeed on Windows.
Can anyone suggest me how to solve this trouble?
Thanks a lot!
Solved! Go to Solution.
07-08-2020 09:51 AM
07-08-2020 11:15 AM
07-08-2020 06:44 AM
07-08-2020 07:42 AM
When I connect to the SSID, it appears the link:
Picture is attached. I have tried to turn the firewall off, but it's no use. Otherwise, it works perfectly on Iphone and Android.
"What debugging have you done?" What command should I use to get the information? I check the message logs, but it seems to show nothing.
Thanks in advance!
Best regards
M.
07-08-2020 07:57 AM
07-08-2020 07:30 AM
07-08-2020 08:36 AM
When I press connect, there's nothing happen! Also, I don't receive any error message from client.
I have try http (or) https:// 192.0.2.1/login.html, but look like can't connect. Always the picture like above appears.
07-08-2020 09:51 AM
07-08-2020 09:56 AM
- For starters clear your cache and all cookies.
M.
07-08-2020 11:15 AM
07-11-2020 04:14 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide