Cisco 5508 Controller Compatibility with AIR-AP37021

[okoroji80]

Dear Community Member,

 I want to find out the compactibility of  Access Point ( AIR-AP37021)

AIR-AP3702I-UXK9

802.11ac  AP 4x4:3SS w/CleanAir; Int Ant; Universal

with Cisco WLAN controller 5508 with ios version 7.4.100.0

[Feichti]

Sorry but this Accesspoint is not supported. See the releasenotes:

http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn74.html

You need at least Version 7.6 to support the 3702 for the UX Version i dont find anything in the releasenotes.

But for the 2702 with the UX Version the minimum release is 8.0.110.0 so it could be the same for the 3702I-UXK9

Hope it helps.

[Rasika Nayanajith]

Yes, You require 8.0.x code for your WLC to get this UX domain AP working. First upgrade your controller to 8.0.121.0 (latest in 8.0.x code)

Then you have to prime your AP first and refer below guide for that.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-0/AP_Regulatory_Domain_DG/b_universal_AP_regulatory_domain_DG.html

HTH

Rasika

*** Pls rate all useful responses ***

[mohanak]

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/ux-ap/guide/uxap-mobapp-g.html

This guide provides instructions on how to prime a Cisco Aironet Universal Access Point (hereafter referred to universal AP or simply as AP).

This guide is to be read in conjunction with the following user guides:

• Cisco Wireless LAN Controller Configuration Guide
  URL for release 8.0 configuration guide: http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-guide/b_cg80.html
• Cisco IOS Configuration Guide for Autonomous Aironet Access Points
  URL for Cisco IOS Release 15.3(3)JAB configuration guide: http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3.html