01-04-2015 02:49 AM - edited 07-05-2021 02:12 AM
Hi experts,
I am installed two Cisco 5760 and local APs have joined the WLC. The customer has 13 branches with 3 APs each branch. The code of the 5760 is on 3.3.4. I have read that the 5760 does not support flexconnect mode. How do I configure these branch APs to join the WLC? Is there any configuration template that I can follow? DHCP sever is located centrally.
Regards,
Manuelito
Solved! Go to Solution.
01-04-2015 01:48 PM
5760 only support local mode AP at the moment.
So you cannot locally terminate branch wireless traffic, every thing has to come to the central WLC.If you want you can create AP group per branch & give different subnet for each branch wireless users defined at your HQ switch network.
HTH
Rasika
**** Pls rate all useful responses ****
01-17-2015 02:02 PM
you need to open udp 16666 and 16667
01-04-2015 01:48 PM
5760 only support local mode AP at the moment.
So you cannot locally terminate branch wireless traffic, every thing has to come to the central WLC.If you want you can create AP group per branch & give different subnet for each branch wireless users defined at your HQ switch network.
HTH
Rasika
**** Pls rate all useful responses ****
01-04-2015 09:24 PM
Hi Rasika,
Are there any ports that should be opened in the firewall? I just have to define dynamic interfaces for each branch in the 5760?
Regards,
Manuelito
01-17-2015 02:02 PM
you need to open udp 16666 and 16667
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide