07-17-2013 01:36 AM - edited 07-04-2021 12:26 AM
I have a question about the new Cisco AP 1530 series (AIR-CAP1532I or E).
On the data-sheet it's written controller-based. But is it also compatible with flex-connect mode?
Because I use a 7500-flex WLC.
AP data-sheet:
http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps12831/data_sheet_c78-728356.html
Thank you,
Jerome
Solved! Go to Solution.
07-17-2013 04:30 AM
That should be supported in the v7.5 code when that comes out.
Sent from Cisco Technical Support iPhone App
07-17-2013 04:30 AM
That should be supported in the v7.5 code when that comes out.
Sent from Cisco Technical Support iPhone App
07-17-2013 08:02 AM
Thanks!
I just got the information this AP is planned for Q4-2013... I did not knew that.
So this could explain it's not on the supported list yet.
Thank you,
Jerome
12-06-2013 01:46 AM
Does anyone really knows? 7.5 is out, anyone had tried AP 1530 in FlexConnect mode?
01-11-2014 04:10 PM
It's supported on the 7.6 now.
Best Rgds,
Jerome
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide