Cisco Catalyst 9130AX invalid configuration

[ramiro.oliveira]

Hello everyone,

I'm trying to configure a Cisco Catalyst 9130AX but I'm running into this error when I validate the configuration.

Any idea of what I can try to solve this?

Thanks.

AP216>wireless config validate
AP216>
*Sep 15 09:53:34.769: %SYS-5-CONFIG_I: Configured from console by on vty0 (EEM:Mandatory.crypto_pki_vwlc_ssc_config)
AP216>
*Sep 15 09:53:36.103: %CONFIG_VALIDATOR_MESSAGE-5-EWLC_GEN_ERR: Chassis 1 R0/0: wncd: Error in AP: APA488.73D6.1B68 with address b811.4b3b.fa00Radio state down for slot 0, Unknown reason 
*Sep 15 09:53:36.103: %CONFIG_VALIDATOR_MESSAGE-5-EWLC_GEN_ERR: Chassis 1 R0/0: wncd: Error in AP: APA488.73D6.1B68 with address b811.4b3b.fa00Radio state down for slot 1, Unknown reason

[Leo Laohoo]

Look at the cursor.  The AP is not even in "enable" mode.

[ramiro.oliveira]

Sorry, I wasn't aware that made a difference. In any case in "enable" mode the result is the same.

AP216#wireless config validate
AP216#
*Sep 15 09:46:29.330: %SYS-5-CONFIG_I: Configured from console by  on vty0 (EEM:Mandatory.crypto_pki_vwlc_ssc_config)
*Sep 15 09:46:30.221: %CONFIG_VALIDATOR_MESSAGE-5-EWLC_GEN_ERR: Chassis 1 R0/0: wncd: Error in AP: APA488.73D6.1B68 with address b811.4b3b.fa00Radio state down for slot 0, Unknown reason
*Sep 15 09:46:30.221: %CONFIG_VALIDATOR_MESSAGE-5-EWLC_GEN_ERR: Chassis 1 R0/0: wncd: Error in AP: APA488.73D6.1B68 with address b811.4b3b.fa00Radio state down for slot 1, Unknown reason
AP216#

[Arshad Safrulla]

Did you assign the site, policy and RF tag to the AP and try this again. If possible paste a sanitized configuration to check and confirm. 

[Rich R]

and what version of code are you running?

[ramiro.oliveira]

I've found out it might be an issue with the external antenna. I'm getting a new one and trying again as soon as I get it.