Cisco Catalyst AP 9100 series in WPA2 mode and Enterprise PEAP

[Sili]

Hello , Can you point me the procedure to configure the Cisco Catalyst AP 9100 series in WPA2 mode? The configurations I tried are not working. With continuation to that, I want to configure the same AP in Enterprise mode with external radius server. Please help.

[marce1000]

        - FYI : https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/100708-wpa-uwn-config.html

 M.

[MHM Cisco World]

you use enterprise wpa2 so it need radius sure 
can I see how you config it?

thanks 

MHM

[JPavonM]

@Sili check this guide to configure local RADIUS authentication in the AP:

https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/215026-local-eap-authentication-on-catalyst-980.html

[Rich R]

@Sili 
What model of AP?
What model of WLC (controller)?
What software version are you using?