Hello,
It seems i have the same problem: the Prime Infrastruture 1.2 cant reach the MSE 7.3.101.0 (WLC same version).
With scan port, I can see that my MSE is opened on port 8001 and SSH
/etc/init.d/msed status
STATUS:
Health Monitor is running
Starting MSE Platform, Waiting to check the status.
MSE services are up, getting the status
-
Server Config
-
Product name: Cisco Mobility Service Engine
Version: 7.3.101.0
Health Monitor Ip Address: 1.1.1.1
High Availability Role: 1
Hw Version: V01
Hw Product Identifier: AIR-MSE-VA-K9
Hw Serial Number: S-CISCO-MSE-1.xxxxxxxxxx
Use HTTP: true
Legacy HTTPS: false
Legacy Port: 8001
Log Modules: -1
Log Level: INFO
Days to keep events: 2
Session timeout in mins: 30
DB backup in days: 2
-
Services
-
Service Name: Context Aware Service
Service Version: 7.3.0.40
Admin Status: Enabled
Operation Status: Up
Service Name: Wireless Intrusion Protection Service
Service Version: 1.0.4038.0
Admin Status: Disabled
Operation Status: Down
Service Name: MSAP Service
Service Version: 1.1.0.38
Admin Status: Disabled
Operation Status: Down
-
Server Monitor
-
Server start time: Thu Oct 04 20:16:02 CEST 2012
Server current time: Thu Oct 04 20:19:30 CEST 2012
Server timezone: Europe/Paris
Server timezone offset: 3600000
Restarts: 2
Used Memory (bytes): 19686320
Allocated Memory (bytes): 160956416
Max Memory (bytes): 477233152
DB virtual memory (kbytes): 0
DB virtual memory limit (bytes): 0
DB disk memory (bytes): 1932920448
DB free size (kbytes): 0
-
Active Sessions
-
Session ID: 32429
Session User ID: 2
Session IP Address: 10.2.199.2
Session start time: Thu Oct 04 20:16:36 CEST 2012
Session last access time: Thu Oct 04 20:18:35 CEST 2012
-
Context Aware Service
-
Total Active Elements(Wireless Clients, Tags, Rogue APs, Rogue Clients, Interferers, Wired
Clients): 0
Active Wireless Clients: 0
Active Tags: 0
Active Rogue APs: 0
Active Rogue Clients: 0
Active Interferers: 0
Active Wired Clients: 0
Active Elements(Wireless Clients, Rogue APs, Rogue Clients, Interferers, Wired Clients, Ta
gs) Limit: 100
Active Sessions: 1
Wireless Clients Not Tracked due to the limiting: 0
Tags Not Tracked due to the limiting: 0
Rogue APs Not Tracked due to the limiting: 0
Rogue Clients Not Tracked due to the limiting: 0
Interferers Not Tracked due to the limiting: 0
Wired Clients Not Tracked due to the limiting: 0
Total Elements(Wireless Clients, Rogue APs, Rogue Clients, Interferers, Wired Clients) Not
Tracked due to the limiting: 0
-
Context Aware Sub Services
-
Subservice Name: Aeroscout Tag Engine
Admin Status: Disabled
Operation Status: Down
Subservice Name: Cisco Tag Engine
Admin Status: Enabled
Operation Status: Up
#
The enablehttp command in ssh doesn't solve the problem...
Thanks a lot if you have any idea.
Regards,
Gérald.
