12-21-2010 06:36 AM - edited 07-03-2021 07:34 PM
Hi,
Can someone please explain whether i need "auto qos trust dscp" or auto qos trust cos" command on the ports that are connected to the switch. The WLC is configured to use LAG when connecting to the Cisco 6500 switch. The switchports are configured as a port-channel on the Cisco switch.
I am using autoqos across the wireless and wired network.
Thanks
Zee
Solved! Go to Solution.
12-21-2010 07:23 AM
Hello,
You better do a trust cos on the port where controller is connected since it's L2 trunk.
Cheers,
Brendon
12-21-2010 07:23 AM
Hello,
You better do a trust cos on the port where controller is connected since it's L2 trunk.
Cheers,
Brendon
12-21-2010 07:54 AM
EXcellent. Short and precise! Thank you
12-24-2010 08:10 PM
Zahir,
WLC --> SWITCH = COS
AP --> SWITCH = DSCP
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide