Wireless

Hello,I have this guest wlan working with web authentication, as you may know in order to get authenticated you must have an IP address first then have a valid username and password. The problem is that if you don't have valid credentials you keep th...

Hi guys.. I have the next scenario:4 WISM Modules (8 Controllers), administered by a WCS 7.0.230.0.All the Controllers have the same configuration and all are members of the same Mobility Group. But for some reason, the WCS says that there are 2 RRM ...

How does the Aironet 600 handle Mac Filtering if I were to connect a switch to port 4 on the back ("Secured" network port). Does it authenticate each MAC or does it do somthing similar to how 802.1x with multi-host works, the first mac authenticates ...

Hi i have configured wlc 2504 .in that i have configured two interfaces.one is guest, 2nd is internal user,the pblm when user try to connect with that contain ssid user not getting ip address,i have connected only one link between core to wlc on port...

Hi all,  One of my customer place they want strong authencation for anroid mobiles also. Where apple phones supports WPA2-enterprise, they already  using mac based authentication. Thanks in advance.

We have started to deploy a CAWLAP migrating autonomous to lightweight.  In the configuration, the SSID was broadcast.  Windows PC and mobile devices had no problem connecting.  Now when we changed it to non-broadcast, windows PC can not access while...

  Hi i got my first WLC 5508 with software 6.0.199.4 and i deployed in site and the branches i have started registring AP's HREAP mode. And its working fine .The second WLC came with software 7.2.103.0 so i doubt if i connect this WLC IN one of the s...

Where is the html source located in the WLC for Guest web authentication page.                  

Hi, We have setup a new wireless environment and were looking at using EAP-TLS. This works ok, but no matter what we do it will never prompt for username and password credentials as well as the mutual certificate authentication. Is there a way that t...

Hello, In the WLC there are two groups (say A and B).  How would I take group B and point it to a RADIUS server for authentication please?  Looking for a step by step answe please. The server is ping reachable.  I have seached  but did not see any di...

Hi All,We are using a cisco ACS 4.2 in our network for wireless and VPN client authenticantion. Recently we are getting huge logs from ACS continously to RA server  when the users are gets Authenticate . below is the error which Message which we have...