Cisco Wireless LAN Controller (WLC) 5508 Password Invalid - Password recovery on the WLC

[bm_5789]

I am trying to add 2 additional dhcp servers to the wlan interfaces on my 5508 controllers.  The controllers are running 8.0.133.0 code.  I already have 2 dhcp servers on each interface but need to add 2 more.  Is this possible?  TIA

[bm_5789 · Accepted solution]

Sorry, I did not mean to post this under the title above.

[Leo Laohoo · Accepted solution]

It can be done but it has to be done in a different sort of way. 

The controller firmware supports Interface Groups (aka Etherchannel).  

So create a new dynamic interface with the new details for DHCP 3 & DHCP 4.  Create an Interface Group and bundle the interfaces together. 

Go to the WLAN SSID settings (or AP Group) and change the interface to point to the Interface Group.