Cisco Wireless vWLC version 8.10.130.0 - Issues connecting to SSID (WPA2 with PSK)

[Jeremy Gibbs]

I am using Cisco 3702 APs running the same code as the controller. When I connect to my SSID, everything works, but when I roam to another AP, I get asked for the PSK again. Sometimes it accepts it, other times it just says the PSK is incorrect. I have verified my settings and everything seems in order. Any help would be appreciated.

Here is the config:

https://pastebin.com/2PCn2eCQ

[Jeremy Gibbs]

APs are in flexconnect mode, also, 2.4 Ghz is disabled, VLANs are tagged on the ports the APs are using, and the native VLAN is 100 (untagged VLAN).

[patoberli]

Can't see much wrong with the configuration. I suggest running a 'client debug macadress' on the WLC and then do a roam. Please post the output of that.

Config analyzer: https://cway.cisco.com/wireless-config-analyzer/