11-06-2018 05:38 PM - edited 07-05-2021 09:25 AM
Hi all,
does any one could advise me on how to do configuration of Cisco WLC 2504 and Cisco AP 1832 to provide user both laptop and mobile phone( IOS and Android)to connect to Canon Wifi printer MG4100 Series by name searching setup ( not setup manually by configure the IP). I can connect to the AP and set the printer up by Manually adding the IP address of the printer and printer from another SSID and Vlan but I can only search and setup the printer by name only the same Vlan could not do it from another Vlan.
11-06-2018 07:02 PM
Hi,
What are you using for name resolution on your network?
11-06-2018 11:42 PM
DNS
11-06-2018 11:46 PM
Hi,
Have you added the printer to dns?
Thanks
John
11-06-2018 11:49 PM
Thanks I will try.Should it work for Mobile Phone too,right?
11-07-2018 01:25 AM
It is not working for adding DNS host record.It will work if we connect to the same SSID.
It is about Broadcast forwarding from Printer VLAN to another Vlan.
11-07-2018 04:37 AM
Hi,
After adding the printer to dns, can you ping the printer name?
Thanks
John
11-07-2018 03:07 PM
Yes,i can ping by name.It is about printer setup searching automatically it is related to broadcast and Multicast dns not DNS.
11-08-2018 05:38 AM
If the printer supports it, check mDNS configuration on WLC.
Here a possible manual: https://mrncciew.com/2013/03/27/configuring-mdns-on-wlc-7-4/
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide