Client connection time

michael18 · ‎11-27-2023

Is there a way to see how long a client has been connected to a SSID. Either GUI or CLI

Thanks

MHM Cisco World · ‎11-27-2023

Monitor > Clients and Users > look under Association Time (last column).

michael18 · ‎11-27-2023

I have checked there and that column isnt there. I have software version 8.10.183.0

Thanks

MHM Cisco World · ‎11-27-2023

Check blue arrow' I think you can add columns to your client monitor.

michael18 · ‎11-27-2023

that just gives me options per client, link test etc. Theres no options to add columns. it looks like the feature has been removed from the client screen.

Rich R · ‎11-27-2023

show client detail <mac>
and look for "Connected For"

------------------------------
Please click Helpful if this post helped you and Accept as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
Field Notice: FN74383 APs Running 17.12.4/5/6/6a May Run Out of Flash Space Preventing Upgrades
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390

michael18 · ‎11-28-2023

Thanks for your responses. My aim is to look at an SSID and see if theres any devices connected for long periods. There only seems to be an option to look at each client individually. A bit time consuming.

Thanks any way. Appreciate it.