Hello all,I have a question for wireless networking engineersIt's known that SSID supports only one vlanbut is there any way to make a single SSID have multiple Vlans?This will be needed in the case of when a company have multiple departments, each d...
I have an EWC on Catalyst installation that supports APs installed in different subnets. The controller is in one of these subnets.I believe if a AP in one of the other subnets became the controller, the controller would be inaccessible. Does EWC "kn...
Recently, we have received complaints from customers regarding slow wifi in a specific section of the floor. Upon checking in Cisco DNAC, I found that the WAP the client is connected to is showing high noise on the 5GHz spectrum. I changed the nearby...
I bought a new Cisco C9115AXI-ECW and after 30 days, it will not power on. It worked fine throughout the 30 days. It quit working all of a sudden. It will not get power over POE or using power injector. It just died, no sign of power. This was purcha...
If I enable the DHCP Guard and RA guard tickboxes, but do not enter any 'allowed servers' on the list, do these features block all servers. We do not use IPv6.Thanks.
Hello community, I am configuring and segmenting my network into different Vlans for the different buildings that I have in the city, but I have a detail that I can only assign one Vlan to one SSID of my wireless network, someone help me or have you ...
Hi, I have an issue of AP restart with the reason not known. I have check the log from the switch and only link up and down happened at the time. Trying to find more information of the reason but didn't have much. Anyone ever found this? ------------...
Are Self Identifying Antennas supported on EWC on a 9120?Thanks.
Im trying to figure out if there is any difference in available channels on these two regulatory domains for a installation in China. There have already (some time back) been deployed C domain APs, but now we have got new H domain APs. Is there anyth...
Hello Cisco Team, Can anyone share Cisco Catalyst 9100 EWC access point configuration for Cisco ISE. We have a Cisco ISE in network. Cisco ISE need to authenticate network devices. Then only we can configure Wireless Network. Please share configura...
We recently upgraded our Cisco WLC 5508 from and older code 7.0 to 7.4.121.0 (as well as firmware upgrade). We have quite a few Cisco 1552E APs that aren't operating in a MESH fashion. They each have a wired uplink. They aren't located at any Branch ...
Greetings, Kindly advise if Cisco Embedded Wireless controller support Active Directory integration via LDAP. Has anyone configured and tested this?
I am migrating from a 5508 to an 8540 WLC. I used the WLC converter tool and it advised me that the encrypted passwords for RADIUS and TACACS won't be recognized. I have the actual passwords but don't know how to fit them into the text file before ...
I am in the process of moving our 5520 WLC to a 9800-cl, and thus far everything works with exception of our CWA portal. We are running ISE 3.0 for our guest/byod portal, and everything continues to work from our 5520 wlc, but when I connect to our g...
Understanded
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 10-15-2026 05:58 PM | ||
| 10-12-2026 06:46 PM | ||
| 09-30-2026 07:34 AM | ||
| 08-10-2026 11:32 AM | ||
| 08-06-2026 09:29 PM |
| User | Count |
|---|---|
| 5 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |
