04-03-2017 09:40 AM - edited 07-05-2021 06:47 AM
hi everybody
I have this solutions
Cisco Prime 2.2
WLC 8.3
CMX 10.2 (Locations anf analytics)
I have many branches offices, In the CMX import all the maps and WLC by the PI
In the branches, the maps that import are all the biulding ( 3 floors) but my problem is:
That certain Aps use those CMX licenses and not all Aps that the CMX sees use licenses.
Example. On a floor I have the AP 1,2,3 and 4, we want to put in CMX the AP 1 and 3 and that these APs only consume CMX licenses
Or only one floor will use CMX and the anothers floors dont have.
Will they know if there is any way to differentiate APs or just include any that I need.
Thanks
08-04-2017 01:43 AM
Hi Julio,
did you get an answer or found one for you question ?
Regards
08-05-2017 10:05 AM
I'm asking a question for this
10-03-2017 02:30 PM
10-03-2017 02:56 PM
As far I can remember, quite sometime dont access CMX, it should have a TAB with "Access Points", where you can Map those Access Points you can manage through CMX.
Is that what you need?
10-03-2017 03:18 PM
10-03-2017 03:27 PM
No. That I am sure.
You need a basic license for CMX, you must have already and for each Access Point you need a L-LS-1AP-N CMX Base license.
This means that you can have granularity on the AP licensing as the licenses if for AP. In your case you need 100 X L-LS-1AP-N and is up to you which AP you are going to add.
05-28-2018 01:44 AM
Hi Julio!
This answer might be to late. But if you haven't found the solution to this problem yet this is what you want to do to be able to "cherrypick" AP:s for CMX:
First of all, delete all the sites in CMX.
in PI;
Create separate sites for the APs you want to "pair" with the CMX.
You might even want to make a copy of the whole site and then just add "CMX" to the sitename. ex:
"Boston_Branch" -> "Boston_Branch_CMX"
When you have a separate site/building/floor for your intended "CMX AP:s" you then add the AP:s you want to them and then you export them from Prime Infrastructure and import them manually in CMX.
You can export all the sites in one exportfile or make one export for every "new" site.
The "mistake" is basicly that you have used the import-from-Prime feature (which adds all AP:s that are added/positioned on a map) instead of only importing the APs you want.
Hope this helps someone :)
BR
/Mikael Lindgren
System Technician/Operations manager
Tele2 Business AB Sweden
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide