09-17-2010 04:24 AM - edited 07-03-2021 07:11 PM
hey folks,
i was wondering whether we can convert the following combo from ios to lwapp.....
1231G with RM21A radio module works fine in autonomous....
Will it work if the same 1231G with RM21A radio module converted to lwapp?
12.3(8)JA2 is IOS software release version the autnomous mode runs....
gone thru the below link.. but its not convincing..
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html
balag
Solved! Go to Solution.
09-17-2010 05:47 AM
suren,
any luck
balag
09-17-2010 05:53 AM
case number i cannot pass it on.. its a internal stuff.. only the customer and i can see it.. to clarify ur doubt.. when i used tool to convert the modular radio module which had both G radio and A-radio.. the conversion went well but the AP kept rebooting.. so we consoled into the Ap and tried archive download,.... after which the AP did not relead at all.. and it joined the WLC as well with some SSC issues..
Regards
Surendra
09-17-2010 06:11 AM
hmmm... ok..
so to resolve this... we need to use archive download command..
is that correct?
also did you get any tracebacks in the ap when it is rebooting often...
thanks
balag
09-17-2010 06:14 AM
nope.. we i did not see any tracbacks.. ok.. if ur are getting the tracebacks.. then its AP crashing.. not just rebooting.. open up a tac case for if the customers Aps are generating tracebacks..
Regards
Surendra
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide