Converting LWAP to Autonomous AP

[acharyr123]

Hi,

I have LWAP 1242-AG. I don't have WLC. I am able to login to AP via console but http access is not happening into that. AP is directly connected with switch.

I want to make it work as autonomous AP by upgrading the image.

From CLI is this possible!!

[andrew.prince · Accepted solution]

Partha,

In the below link - follow the instructions for the section "Converting a Lightweight Access Point Back to Autonomous Mode" :-

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272

HTH>