Wireless

Hi, I am trying to use my AP with my cable modem. I have upgraded to the proper ios but am still running to a issue. Ideally, I want the AP connected to the cable modem and client would connect to the AP, get an IP and be able to surf the web. Right ...

Hi,Let me first come with my Wireless scenario. I have a L3 switch ->Firewall->L2 swith-> WAN Router-> I have WLC module in router. Now I have connected my LAP to L2 switch and LAP are able to register themselves with the controller. I have defined d...

40 locations, around 20-30 APs per location, 1 gig back from each site to the main site, minimizing cost. Trying to size the guest anchor controller. Redundancy is not required. As I understand correctly 4402/4404/5508 controller supports up to aroun...

I have a strange one. If I take a new access point to one of our remote and plug it in, it will not join the controllers at the home location (running latest 4.2) but it will eventually find one of our 2106 controllers running 5.1. If I take an acces...

Hello,Once or twice each week our organization's wireless stops working. When this occurs, individual do get an IP, but cannot ping the router. I can resolve the issue by doing a shut / no shut on dot11radio 0. Is this a configuration error (I don't ...

THe latest code has a new feature described below. Does that help with the issue of moving all APs off a controller prior to upgrading the controller. If so it would be very welcome. Also, the lastest MD code is 4.2.207.0. I have been running 5.2.178...

I am planning to upgrade to this code and i wanted to know if anyone have experience any issues .Thank youVic

Hello.I have recently setup a WLC at a loctaion.Everything is fine excpet the guest access.I have selected Web-Auth for the guest wireless network.Users can connect to the guest network with no isses, but when they open IE the web login page doesn't ...

Hi,Has anyone been able to configure restrictive access to the Management interface? I created an ACL that specifies our Management VLAN and set the action to "permit". I then added this ACL to the management interface, but I'm still able to login fr...

Hi GuysI need someone can help me please, my problem is this:We have a wireless mesh network with 2 WLC and 24 LAP1510AG (4 RAPs), which are registered to the WLC 1 when tested HA, i turn off the WLC 1 to operate the WLC 2, there were only 12 of the ...

In order to replicate a bug, I'm looking to add a Cisco WAP to my lab which has an ssh banner of SSH-2.0-OpenSSH_4.0.Does anyone know of a hardware / software version which runs this version of SSH?I have a 350, 1100 and 1220B but they are all runnin...

hi NetPro,this AP keep rebooting ,any idea ? i have set to factory default , but still the same.pls see the attchment.Regards,Jackal

Whit MAC Address filetering configured in a WLAN in the WLC ? The user information is encrypted.Whit Web Authentincation filetering configured in a WLAN in the WLC ? The user information is encrypted.

Hi there,I have a question with respect to DHCP Proxy to an external DHCP server. Is it possible to force the DHCP proxy to use the Management Interface as the source for all DHCP requests? My Wireless setup has all the dynamic wireless VLAN's going ...

Hi.I have a problem with unified solution.This is scenario:Client scanners mod. DENSO))((AP1230 automous))((telnet to AS400Mod. Denso BHT210BW, after 5 min of inactivity the client activates the standby mode, disable the radio.The warehouseman press ...