DOT1x restarted due to EAPOL-START/CLIENT ROAM

AndrewClaseman · ‎09-15-2021

Hello everyone,

I'm having an issue with only a few laptops that are trying to connect to our wireless but when they do, they either can't connect or they do but get a Microsoft private network address (169.x.x.x) Each one seems to get this error:

*Dot1x_NW_MsgTask_7: Sep 15 11:33:29.470: %DOT1X-3-ABORT_AUTH: [PA]1x_bauth_sm.c:487 Authentication Aborted for client 44:85:00:97:ea:d7 Abort Reason:DOT1X RESTARTED DUE TO EAPOL-START/CLIENT ROAM

The WLC is a 5508 at version 8.5.140.0.

There are times they do connect but have no internet as well. And this will be across all my SSIDs.

Also seems to be older laptops and with Intel Dual-Band 8260 wifi cards.

Any help would be great!

Thank you.

marce1000 · ‎09-15-2021

- Make sure drivers are up to date :

https://www.intel.com/content/www/us/en/support/intel-driver-support-assistant.html

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Rich R · ‎09-17-2021

And latest version of AireOS 8.5.182.0

https://software.cisco.com/download/home/282600534/type/280926587/release/8.5.182.0

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390