enable webinterface on a Cisco Aironet 1240AG

[sdhondt32]

We installed some time ago a wireless bridge between 2 buildings and disabled the webinterface. does someone know how i can re-enable it from within an SSL connection?

Thx

[ebreniz]

To re-enable the web-browser interface, enter this global configuration command on the access point CLI: ap(config)# ip http server

[carlos.ing.navarro]

can i do it whit the command 

AP#debug lwapp console cli or debug capwap console cli=?

example

debug capwap console cli

conf t

ip http server

my AP model = 1142n   whit disabled web access

other question   what is the command to save all changes

thanks for ur attention

[PiotrDezor16899]

ap>en
Password:
ap#conf t
Enter configuration commands, one per line. End with CNTL/Z.
ap(config)#ip http server
ap(config)#exit
ap#

[JLVB83]

Hey guys new to the community I'm trying to do something similar picked up a old AP from a recycle bin AIR-CAP3502I-A-K9 I was able to default it, set a static IP, enable the HTTP server, but when i log into the GUI I see an enter button and when I click on it, the unit tells me its not in flex connect mode.  I would like to access the GUI if it truly has one just because the CLI interface is still a little daunting for me.  Any help would be great thks.