12-05-2012 11:37 AM - edited 07-03-2021 11:10 PM
When I try to delete any of the authentication servers on the WLC it gives the error "error in deleting auth server". When I try to delete it in the CLI, it says "Error: Server does not exist". But clearly it shows up on the list in the GUI.
When I try to edit any details on any of the authentication servers is gives the error "Error in disabling state".
Is there anyway to delete the servers or enable them? The authentication servers were enabled and working before we updated from 7.0.230 to 7.2.110.
Solved! Go to Solution.
12-05-2012 01:15 PM
Export the config, remove the radius servers, import the edited config to wlc. now add the servers back.
12-05-2012 01:15 PM
Export the config, remove the radius servers, import the edited config to wlc. now add the servers back.
12-05-2012 11:49 PM
Does these Radius servers added to wlan, if so de-select them from wlan and try, however it is strange that it didn't let you disable the state.
display the output of below command.
WLC>show invalid-config
12-06-2012 11:01 AM
This step worked: I exported the config and removed the radius servers on the config text file, then uploaded the new config, then readded the servers.
Thank you!
12-06-2012 11:03 AM
Andrew, Thank You!!! for posting the solution.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide