02-09-2011 11:44 PM - edited 07-03-2021 07:48 PM
hi,
i am looking around hwo to know the flash and ram installed in WLC 4402 ?
try looking any command, sh ver not there. even in WCS.
any idea?
thanks..
Solved! Go to Solution.
02-10-2011 02:49 PM
Hi,
wlc doesn't have the sh flash command like other Cisco platforms. Anyhow if this might help you, you can do
show boot (to see images that are sitting on the wlc)
show memory statistics (to see the memory)
thanks
Serge
02-10-2011 02:49 PM
Hi,
wlc doesn't have the sh flash command like other Cisco platforms. Anyhow if this might help you, you can do
show boot (to see images that are sitting on the wlc)
show memory statistics (to see the memory)
thanks
Serge
02-11-2011 10:38 PM
hi sarge,
thanks for the answer. i think that explain why there is no such info in inventory by WCS.
04-03-2019 01:51 AM
Dear All,
Can you please help me finding the right command to :-
- show memory size of all AP's installed through WLC , i'm using version 8.3 , i did run " show mesh ap summary " but it only shows mesh AP's . what about root AP's ?
Best Regards,
Kasem Klot
04-04-2019 05:18 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide