03-17-2014 04:01 PM - edited 07-05-2021 12:27 AM
Hi,
I have several APs where if they lose power and re-associate to the same WLC they would lose their VLAN mappings under the Flex connect tab.
I get the below error log from the AP:
*Mar 15 03:42:06.187: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file
*Mar 15 03:42:06.188: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file
*Mar 15 03:42:06.188: %LWAPP-4-CLIENTEVENTLOG: No LS Flex ACL map configuration file to load. Connect to controller to get configuration file
*Mar 15 03:42:06.189: %LWAPP-4-CLIENTEVENTLOG: No Central Dhcp map configuration file to load. Connect to controller to get configuration file
Any idea why the AP is losing its VLAN mapping?
Thanks
10-13-2014 06:05 PM
Please upgrade the WLC
07-17-2017 04:30 AM
hi,
I am also facing the same issue. If the flex connection loosing the vlan's then how it integrates with WLC. i have 5 Aps in my network. i have seen the same issue at the time of the AP integrated with the WLC. Out of 5 APs are integrated with WLC and remaining 2 APs are rebooting.
if we loos the flex vlan mapping the how those 3 APs are integrated.
Thanks and Regards,
Nipun net solutions.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide