@Nolan Herring Oh, they're set in that section of the individual setup page! I had an problem with an AT&T supplied switch that caused issues with my DHCP/DNS for a few sites. It was a MetroLan mesh network with MS320s at the edge of each site relaying DHCP to a Windows server. Long story short, reservations that had existed before me were failing, so I had to change some devices to static IP and remove the reservations. Worked fine for devices like network printers and computers, but the MR34s refused to accept or use their static settings.
I recently switched to a new mesh and equipment, still using the MS320s at the sites, and still have multiple random 'bad ip assignment' or 'bad DNS' for no discernible reason. Some will be fine for 3+ days and then just decide 'whatever dude, here's a message'. Could be a single one at 4am, or multiple, or varying times between 80% at one site. If it was all WAPs attached to a specific switch, somewhere along the line, doing it at the same time, at least I'd know what the heck to trace. But this? Quite aggravating, really.
