ā09-03-2014 10:57 PM - edited ā07-05-2021 01:28 AM
Hello,
I configured guest tunneling between 5508 (internal LAN) and 2504 (DMZ) and it works perfectly. However when the tunnel is down guest users are
associated to the management interface on the 5508, I only have to configure an IP adress and a default gateway on a guest user to
be routed on the internal network.....So, there is a security problem in my network architecture.
Do you have advice to avoid this problem ?
Best regards,
Thib
Solved! Go to Solution.
ā09-04-2014 02:21 AM
You can create a "dummy/unrouted" interface on your 5508 & map that to guest SSID instead of management interface.
HTH
Rasika
**** Pls rate all useful responses ****
ā09-04-2014 02:21 AM
You can create a "dummy/unrouted" interface on your 5508 & map that to guest SSID instead of management interface.
HTH
Rasika
**** Pls rate all useful responses ****
ā09-04-2014 04:02 AM
Hi,
Thanks a lot. I though it was necessary to use the management interface.
Regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide