07-16-2013 05:16 AM - edited 07-04-2021 12:26 AM
Hello,
I just configured 2 new AP:
AIR-LAP1262N-E-K9
and i did the configuration just like my 60 others (most of them are AIR-LAP1042N-E-K) and on those one i can not see the SSID, also, in the 'interface' tab i have 1 slot down, what does it mean?I don't think it is normal compare to my other?
slot 0: 802/b/g/n Admin Stat: Disable, oper Stat: Down ...
see attached file
Any idea?
Tx,
B
08-02-2013 12:17 PM
Judging from the attachment, it looks like the Slot 9 802.11b/g/n radio is Admin 'Disabled' state, meaning it was somehow manually disabled. All you would simply need to do is set this back to 'Enabled' to bring it up. You can do this through Wireless > Access Points > 802.11b/g/n. Scroll to the far right for your AP in question and hover over the small blue box > Select Configure. You should be able to set the Admin Status here.
08-05-2013 05:13 AM
I second Erwin. Check the admin state of the radio and set it to enabled rather than disabled.
Rating useful replies is more useful than saying "Thank you"
08-07-2013 05:28 PM
Hello,
As per your query i can suggest you the following link to refer for setup guide-
http://www.cisco.com/en/US/docs/wireless/access_point/1260/quick/guide/ap1260getstart.html
Hope this will help you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide