I just purchased a C9105AXI to add to a small wireless domain, managed on a single C9130AXI. It is not joining the domain as the version is too old and it is not automatically getting the software from the controller.
The 2 devices are in the same VLAN and I have set up the DHCP option correctly.
Shouldn't they just synch up without intervention?
EWC logging:
*Aug 24 18:52:35.919: %INSTALL-5-INSTALL_START_INFO: Chassis 1 R0/0: install_engine: Started install add ap_images:ap1g8
*Aug 24 18:52:36.868: %INSTALL-5-INSTALL_COMPLETED_INFO: Chassis 1 R0/0: install_engine: Completed install add ap_images:ap1g8
C9130AXI>
*Aug 24 18:53:27.081: %CAPWAPAC_SMGR_TRACE_MESSAGE-5-AP_JOIN_DISJOIN: Chassis 1 R0/0: wncd: AP Event: AP Name: AP10F9.20D5.8A78 Mac: 192.168.42.134[5267] Session-IP: 10f9.20d6.2b40 Disjoined Image Download Failed
AP logging:
CAPWAP State: Discovery
[*08/24/2021 18:48:46.5250] Got WLC address 192.168.42.132 from DHCP.
[*08/24/2021 18:48:46.5250] IP DNS query for CISCO-CAPWAP-CONTROLLER.home.callison.org
[*08/24/2021 18:48:46.5480] Discovery Request sent to 192.168.42.132, discovery type DHCP(2)
[*08/24/2021 18:48:46.5540] Discovery Request sent to 255.255.255.255, discovery type UNKNOWN(0)
[*08/24/2021 18:48:46.5540] Discovery Response from 192.168.42.132
[*08/24/2021 18:48:46.5570] Discovery Response from 192.168.42.132
[*08/24/2021 18:48:56.0000]
[*08/24/2021 18:48:56.0000] CAPWAP State: DTLS Setup
[*08/24/2021 18:48:56.7200]
[*08/24/2021 18:48:56.7200] CAPWAP State: Join
[*08/24/2021 18:48:56.7280] Sending Join request to 192.168.42.132 through port 5267
[*08/24/2021 18:48:56.7350] Join Response from 192.168.42.132
[*08/24/2021 18:48:56.7350] AC accepted join request with result code: 0
[*08/24/2021 18:48:56.7430] Received wlcType 2, timer 30
[*08/24/2021 18:48:56.7430] TLV ID 2216 not found
[*08/24/2021 18:48:56.7430] TLV-DEC-ERR-1: No proc for 2216
[*08/24/2021 18:48:56.8040]
[*08/24/2021 18:48:56.8040] CAPWAP State: Image Data
[*08/24/2021 18:48:56.8050] AP image version 8.10.130.0 backup 0.0.0.0, Controller 17.4.1.6
[*08/24/2021 18:48:56.8050] Version does not match.
[*08/24/2021 18:48:56.8650] upgrade.sh: Script called with args:[PRECHECK]
[*08/24/2021 18:48:56.9610] do PRECHECK, part1 is active part
[*08/24/2021 18:48:57.0130] upgrade.sh: /tmp space: OK available 100640, required 40000
[*08/24/2021 18:48:57.0140] wtpImgFileReadRequest: request ap1g8, local /tmp/part.tar
[*08/24/2021 18:48:57.0160] Image Data Request sent to 192.168.42.132, fileName [ap1g8], slaveStatus 0
[*08/24/2021 18:48:57.0200] Image Data Response from 192.168.42.132
[*08/24/2021 18:48:57.0200] AC accepted join request with result code: 0
[*08/24/2021 18:49:23.4540] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Image Data(10).
[*08/24/2021 18:49:25.7370]
[*08/24/2021 18:49:25.7370] Going to restart CAPWAP (reason : image download cannot start)...
[*08/24/2021 18:49:25.7370]
[*08/24/2021 18:49:25.7380] Restarting CAPWAP State Machine.
[*08/24/2021 18:49:25.7470] Image Data Request sent to 192.168.42.132, fileName [ap1g8], slaveStatus 1
[*08/24/2021 18:49:25.7860]
[*08/24/2021 18:49:25.7860] CAPWAP State: DTLS Teardown
[*08/24/2021 18:49:25.8200] Aborting image download(0x0): Dtls cleanup, ap1g8
[*08/24/2021 18:49:26.0010] upgrade.sh: Script called with args:[ABORT]
[*08/24/2021 18:49:26.1050] do ABORT, part1 is active part
[*08/24/2021 18:49:26.1540] upgrade.sh: Cleanup tmp files ...
[*08/24/2021 18:49:26.2080] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: DTLS Teardown(4).
[*08/24/2021 18:49:26.2080] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: DTLS Teardown(4).
[*08/24/2021 18:49:40.5640]
