cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
550
Views
0
Helpful
2
Replies

HQ WLC 5520and branch WLC 2504, branch as primary and HQ as secondary

mohanantassp
Level 1
Level 1

WLC 5520 installed in HQ, i have got WLC 2504 at the remote site, i need to configure the SSID same as HQ at the branch using the WLC 2504, if the branch WLC failed i need the AP to be part of the HQ WLC as backup WLC. how possible is this design. we had bought the branch WLC and AP.. 

2 Replies 2

Hi

 HA SSO which is the best approach will not be possible for you. You should have same hardware in both ends. Further more, 2504 doesn't suposup SSO.

 But you can have N + 1 HA, for example. This redundant method is not good as SSO but is better than nothing. If one WLC drops, AP will migrate to the other site with a small downtime period.

 You can find config example here:

 

https://www.cisco.com/c/en/us/td/docs/wireless/technology/hi_avail/N1_High_Availability_Deployment_Guide/N1_HA_Overview.html#pgfId-1054844

 

-If I helped you somehow, please, rate it as useful.-

 

hi noted on your feedback, will try to run thru you document and comment if required any assistance. 

Review Cisco Networking for a $25 gift card