Increasing VMWare Disk Space For NCS Upgrade

[Dan Man]

I'm trying to upgrade our NCS infrastructure from 1.3 to 2.0.  I received an error during the upgrade that I needed to increase the number of CPU's, RAM, and disk.  I was able to add the additional CPU, RAM, and disk.  Going through the upgrade again, the only error I receive is about adding space to the /opt directory.  I have over 300GB of memory free, after adding the additional space, so this should satisfy the requirement.  When logging into the NCS ADE-OS, I do a sh disks and see that the OS has not recognized the additional space.  With the backend OS being a Cisco Linux version, is there a command I have to run to get the OS to recognize the additional space?  Any help would be appreciated.  Thanks!

[Stephen Rodriguez]

Take a look at this document that Rollin put together.

https://supportforums.cisco.com/docs/DOC-35173

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

[Sandeep Choudhary]

one more way to do:

Increasing diskspace on Cisco Prime Infrastructure NCS 1.2 "the hard way?

http://blog.42.be/2013/01/increasing-diskspace-on-cisco-prime.html

also check this one:

https://supportforums.cisco.com/docs/DOC-26960

Regards