Invalid replay counter

hs08 · ‎11-29-2023

Hello

Anyone can explain what this error say?

*Dot1x_NW_MsgTask_7: Nov 30 07:14:14.829: %DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:452 Invalid replay counter from client 7c:b5:66:6b:4c:f7 - got 00 00 00 00 00 00 00 00, expected 00 00 00 00 00 00 00 03
*Dot1x_NW_MsgTask_7: Nov 30 07:14:14.828: %DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:452 Invalid replay counter from client 7c:b5:66:6b:4c:f7 - got 00 00 00 00 00 00 00 01, expected 00 00 00 00 00 00 00 03
*Dot1x_NW_MsgTask_7: Nov 30 07:14:14.817: %DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:452 Invalid replay counter from client 7c:b5:66:6a:e4:bf - got 00 00 00 00 00 00 00 00, expected 00 00 00 00 00 00 00 03
*Dot1x_NW_MsgTask_6: Nov 30 07:14:14.805: %DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:452 Invalid replay counter from client 7c:b5:66:6b:fd:e6 - got 00 00 00 00 00 00 00 00, expected 00 00 00 00 00 00 00 02
*Dot1x_NW_MsgTask_7: Nov 30 07:14:14.804: %DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:452 Invalid replay counter from client 7c:b5:66:6a:e4:bf - got 00 00 00 00 00 00 00 01, expected 00 00 00 00 00 00 00 03
*Dot1x_NW_MsgTask_0: Nov 30 07:14:14.791: %DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:452 Invalid replay counter from client 7c:b5:66:6c:f2:00 - got 00 00 00 00 00 00 00 01, expected 00 00 00 00 00 00 00 03
*Dot1x_NW_MsgTask_6: Nov 30 07:14:14.780: %DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:452 Invalid replay counter from client 7c:b5:66:6b:fd:e6 - got 00 00 00 00 00 00 00 00, expected 00 00 00 00 00 00 00 02
*Dot1x_NW_MsgTask_6: Nov 30 07:14:14.740: %DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:452 Invalid replay counter from client 7c:b5:66:6b:fd:e6 - got 00 00 00 00 00 00 00 01, expected 00 00 00 00 00 00 00 02

marce1000 · ‎11-29-2023

- FYI : https://community.cisco.com/t5/wireless/dot1x-3-invalid-replay-ctr/m-p/1061866#M31645

M

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Rich R · ‎11-30-2023

Make sure your WLC software is up to date as per TAC recommended link below. You haven't mentioned what WLC, APs and software version you're currently using so not possible to comment any further.

Also make sure the client OS and WiFi drivers are fully updated to the latest versions.

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs