10-12-2004 02:02 PM - edited 07-04-2021 10:03 AM
We had a 350 lose power during the upgrade process from VXWorks to IOS.
The unit reports
_________________
DRAM OK9w7-mx.122-13.JA1/html/level1/ima
*Mar
Power-on reset.: %DOT11-6-DISA
Copyright 1996-2000 Cisco Systems, Inc.tingd device "fec0" a
(49
Copyright 1984-2000 Wind River Systems, Inc.
Station 0040.96a2.38dd Reason: Previous au
System ID: 00409659B4C3lid-sylvaplazahh-01>nte
Motherboard: MPC855 50MHz, 8192KB FLASH, 16384KB DRAM, Revision 909.843: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to dob
Bootstrap Ver. 1.09: FLASH, CRC 710B6415 (OK)
D-01 0040.96a2.38dd Associated
a) Config:AP Installation Key FE020000 64 none Key 0000
b) Config:VAR Installation Key FE020040 52 none Key 0000
c) Config:AWC_ConfigDB FE020074 840 AiroDB1 Data 0000
Socket Controller Error: No FPGA file!
System ID: 00409659B4C3
Motherboard: MPC855 50MHz, 8192KB FLASH, 16384KB DRAM, Revision 90
Bootstrap Ver. 1.09: FLASH, CRC 710B6415 (OK)
Initialization: Improper Motherboard Config
Type '=' for main menu.
c -- Copy file
f -- File dir
l -- downLoad file into DRAM
u -- Upload file
p -- xfer Protocol
n -- coNsole
r -- Run
s -- System info.
______________________________
Is their a recovery procedure?
Thanks.
10-12-2004 03:50 PM
10-13-2004 05:54 AM
Thanks for the reply, but neither of the pages will load for me. I keep getting,
Message #401: Authorization Required/Forgotten Password
The page you are trying to access requires a Cisco.com login and password. You have reached this page because you have either entered an invalid name/password combination or you have forgotten your password. Please see the information below regarding Cisco.com registration.
I am registered, and I'm logged in.
10-13-2004 12:50 PM
10-13-2004 02:55 PM
Thanks, I was able to get the radio back.
12-01-2004 03:39 PM
were you ever able to get your 350 upgraded to IOS?
Is it a "350 workgroup bridge"
or a "350 wireless bridge"
take a look at :
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide