Re: IOS upgrade on 350 Failed

westcare · ‎10-12-2004

We had a 350 lose power during the upgrade process from VXWorks to IOS.

The unit reports

_________________

DRAM OK9w7-mx.122-13.JA1/html/level1/ima

*Mar

Power-on reset.: %DOT11-6-DISA

(49

Station 0040.96a2.38dd Reason: Previous au

System ID: 00409659B4C3lid-sylvaplazahh-01>nte

Motherboard: MPC855 50MHz, 8192KB FLASH, 16384KB DRAM, Revision 909.843: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to dob

Bootstrap Ver. 1.09: FLASH, CRC 710B6415 (OK)

D-01 0040.96a2.38dd Associated

a) Config:AP Installation Key FE020000 64 none Key 0000

b) Config:VAR Installation Key FE020040 52 none Key 0000

c) Config:AWC_ConfigDB FE020074 840 AiroDB1 Data 0000

Socket Controller Error: No FPGA file!

System ID: 00409659B4C3

Motherboard: MPC855 50MHz, 8192KB FLASH, 16384KB DRAM, Revision 90

Bootstrap Ver. 1.09: FLASH, CRC 710B6415 (OK)

Initialization: Improper Motherboard Config

Type '=' for main menu.

c -- Copy file

f -- File dir

l -- downLoad file into DRAM

u -- Upload file

p -- xfer Protocol

n -- coNsole

r -- Run

s -- System info.

______________________________

Is their a recovery procedure?

Thanks.

dixho · ‎10-12-2004

Please try the following URL:

http://www.cisco.com/en/US/partner/products/hw/wireless/ps441/products_tech_note09186a0080093c37.shtml#upgrade102

OR

http://www.cisco.com/en/US/partner/products/hw/wireless/ps430/products_tech_note09186a008019fea0.shtml

westcare · ‎10-13-2004

Thanks for the reply, but neither of the pages will load for me. I keep getting,

Message #401: Authorization Required/Forgotten Password

The page you are trying to access requires a Cisco.com login and password. You have reached this page because you have either entered an invalid name/password combination or you have forgotten your password. Please see the information below regarding Cisco.com registration.

I am registered, and I'm logged in.

dixho · ‎10-13-2004

Here are the documents in PDF format.

westcare · ‎10-13-2004

Thanks, I was able to get the radio back.

cisco · ‎12-01-2004

were you ever able to get your 350 upgraded to IOS?

Is it a "350 workgroup bridge"

or a "350 wireless bridge"

take a look at :

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd6cf67