Issue with Ciso AIR-LAP1142N-A-K9 AP configuration

[Legust321]

I have trouble accessing the internet from my laptop after installing Ciso AIR-LAP1142N-A-K9 AP.

The  AP are connetected to my router (which has a DHCP enabled) via a switch  and each has a Fix IP address with network mask, gateway and DNS  already configured. When I triy to connect to the access point, only the  IP address and network mask are automatically assigned to the my  laptop. and I have to manually input the gatway and DNS to be able to  navigate the internet.

I would like to know which configuration  will allow any node that tries to connect the internet via the access  point to be automatically configured to access the internet after  authentification.

I will appreciate any help in solving the issues.

Best Regards,

[Surendra BG]

Do we hv the default configured on the ap??

Sent from Cisco Technical Support iPhone App

[Legust321]

Please find attached the configuration  we currently have on the AP

Thanks

[Legust321]

Last files

Thanks again for your assistane.

[evanssh]

are you using vlan's ? if so trunk the ports that the AP's are connect to.

Sent from Cisco Technical Support iPad App