Jabber Connect to DX80 Cloud Registered device

HEATH FREEL · ‎05-09-2019

Running Jabber 12.6 - The "Connect to Device" option, from what I understand should allow me to connect my Jabber to my Cloud Registered DX80 using proximity.

My Webex Teams app can connect without issue, however the Jabber either cannot find the DX80 or says "No Network Connection". When I restart Jabber the "No Network Connection" problem goes away. Clearly I have a network connection.

Should the Jabber client be able to find the DX80 and connect. I want to use call control in jabber to dial from my DX80 and I thought this might be a way to make that happen.

Any ideas?

Rich R · ‎05-10-2019

Hi Heath
I think you have the wrong community here - this is about Cisco WiFi - Wireless LAN Controllers, Access Points etc.
I suggest you try https://community.cisco.com/t5/other-collaboration-subjects/bd-p/5791-discussions-other-collab-subjects

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390

HEATH FREEL · ‎05-10-2019

The only other Proximity question in the community was in this space. I'll repost in the suggested space.