LAP to AP conversion

[Marcelo Moreno]

Hello, I have a   question on a Cisco  AIR-LAP1242AG-A-K9 with LAP image it´s possible to load an Autonomous image?

I have done it but with Access Points  that had form factory an AP image change it to LAP and then return the original AP image, but on an Access Point with LAP image from factory convert it to AP I´m not sure is possible.

Thaks.

[Rasika Nayanajith]

Yes, there are multiple ways of doing this.

this post describe one way of doing this. Hope that is useful

http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/

HTH

Rasika

**** Pls rate all useful responses ****