Solved: Re: License for Meraki CW9164I-MR

mcotherman · ‎07-22-2022

I am creating a CCW Estimate for a CW9164I-MR and other Meraki components, but I do not see a License associated with this product like there is for other Meraki items ( similar to how LIC-ENT-3YR is used for an MR AP). I search for LIC-CW, LIC-ENT, LIC-9, and 9164 in CCW with no results for a license. The data sheet just says 'refer to 'cisco licensing', and connectthedots has no additional information.

CCIE# 6771

Rich R · ‎07-22-2022

They still use standard Meraki AP license - nothing special for these APs. This was made clear in all the presentations when they announced the new products.
https://documentation.meraki.com/General_Administration/Licensing/Meraki_MR_License_Guide
So you simply add the usual LIC-ENT-3YR.

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390

View solution in original post

marce1000 · ‎07-22-2022

- You may also go here for that question : https://community.meraki.com/t5/Wireless-LAN/bd-p/wireless-lan

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

mcotherman · ‎07-22-2022

There is not a single post in that community for the CW9164I-MR, and didn't feel like double posting, but thanks!

CCIE# 6771

Rich R · ‎07-22-2022

They still use standard Meraki AP license - nothing special for these APs. This was made clear in all the presentations when they announced the new products.
https://documentation.meraki.com/General_Administration/Licensing/Meraki_MR_License_Guide
So you simply add the usual LIC-ENT-3YR.

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390

mcotherman · ‎07-22-2022

Thank you so much!

edit: it is cryptic, but I found it stated in the 'ordering' section of the datasheet on the Meraki site, which is good enough to present to customer if they question it.: https://documentation.meraki.com/MR/MR_Overview_and_Specifications/CW9164_Datasheet

Meraki access point license required

CCIE# 6771