11-14-2007 02:41 AM - edited 07-03-2021 02:56 PM
Hey All,
I have two WLANs configured on my WLC. One of the SSIDs is for some HREAPs at another site.
I don't want the local APs offering the SSID for my HREAPs, nor do I want the remote HREAPs to advertise my local SSID/WLAN at the remote site.
How do I go about this?
Thanks in advance!
Solved! Go to Solution.
11-14-2007 04:28 AM
Hi Dominik,
Take a look at the WLAN Override functionality. This is from the documentation:
"The default system behavior is for a WLAN Controller (WLC) to push all WLANs to all
of its joined APs. Many Cisco customers deploying the Cisco Unified Wireless Network
solution want to restrict certain SSIDs to sets of access points. For example, an
enterprise might want to offer open guest access in an Executive Briefing Center but no
where else on the campus. The way to override the default behavior is to use the WLAN
Override feature."
Hope this helps. Please rate the response so that others will know you believed it was useful, and helped in answering your question.
Best,
Paul
11-14-2007 04:28 AM
Hi Dominik,
Take a look at the WLAN Override functionality. This is from the documentation:
"The default system behavior is for a WLAN Controller (WLC) to push all WLANs to all
of its joined APs. Many Cisco customers deploying the Cisco Unified Wireless Network
solution want to restrict certain SSIDs to sets of access points. For example, an
enterprise might want to offer open guest access in an Executive Briefing Center but no
where else on the campus. The way to override the default behavior is to use the WLAN
Override feature."
Hope this helps. Please rate the response so that others will know you believed it was useful, and helped in answering your question.
Best,
Paul
11-14-2007 06:17 PM
I just got done looking up WLAN Override. That pretty much hit the nail on the head. Thakns for the help!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide